Hyundai i-30: Convenient features of your vehicle / Climate control additional features
Automatic ventilation
To increase cabin air quality and reduce windscreen misting, air recirculation mode switches off automatically after about 5 to 30 minutes, depending on outside temperature, and the air intake will change to outside (fresh) mode.
To cancel or set the automatic ventilation
feature, select Face level mode
and press the air recirculation
mode button for 3 seconds.
When the automatic ventilation is set, the air recirculation indicator will blink 6 times. When cancelled, the indicator will blink 3 times.
Sunroof inside air recirculation
When the heater or air conditioning system is on with the sunroof opened, the outside (fresh) air position will be automatically selected. At this time, if you press the recirculated air position button, the recirculated air position will be selected but will change back to the outside (fresh) air position after 3 minutes.
When the sunroof is closed, the air intake position will return to the original position that was selected.
Auto defogging system
(only for automatic climate
control system)
Auto defogging reduces the possibility
of fogging up the inside of the
windscreen by automatically sensing
the moisture on inside the windscreen...
Storage compartment
WARNING
Never store cigarette lighters,
propane cylinders, or other
flammable/explosive materials
in the vehicle. These items may
catch fire and/or explode if the
vehicle is exposed to hot temperatures
for extended periods...
Other information:
Hyundai i30 (PD) 2018-2022 Owner's Manual: Power windows
(1) Driver’s door power window switch (2) Front passenger’s door power window switch (3) Rear door (right) power window switch (4) Rear door (left) power window switch (5) Window opening and closing (6) Automatic power window (7) Power window lock switch The ignition switch must be in the ON position to be able to raise or lower the windows...
Hyundai i30 (PD) 2018-2022 Owner's Manual: Manual climate control system
To defog inside windscreen 1. Select any fan speed except “0” position. 2. Select the desired temperature. 3. Select the or position. 4. The outside (fresh) air will be selected automatically. Additionally, the air conditioning (if equipped) will automatically operate if the mode is selected to the position...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Exhaust System (DPF) Warning Light. Glow Indicator Light
- Theft-alarm system
- Battery replacement
- New on site
- Most important about car
Warning light and message
When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light (
)
will illuminate.
