Hyundai i-30: Accessing your vehicle / Smart key

Your HYUNDAI uses a Smart Key,
which you can use to lock or unlock
a door (and tailgate) and even start
the engine.
1. Door Lock
2. Door Unlock
3. Tailgate Unlock
If the remote key is not working properly,
try replacing the battery with a
new one.
Battery Type: CR2032
To replace the battery:
1. Insert a slim tool into the slot and
gently pry open the cover...
To lock :
1. Close all doors, engine bonnet
and tailgate.
2. Either press the door handle button
or press the Door Lock button
(1) on the smart key...
Other information:
Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor)
Replacement
1...
Removal
[Manual Transaxle Type]
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the clutch pedal.
(Refer to Clutch System - "Cluch Pedal")
3...
Categories
Opening the bonnet

1. Park the vehicle and set the parking
brake.
2. Pull the release lever to unlatch
the bonnet. The bonnet should
pop open slightly.

read more