Hyundai i-30: Body Electrical System / Lighting System
Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim assembly...
Other information:
Checking the brake/clutch
fluid level
Check the fluid level in the reservoir
periodically. The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap
and adding brake/clutch fluid, clean
the area around the reservoir cap
thoroughly to prevent brake/clutch
fluid contamination...
Description and operation
Description
MAFS uses a hot-film type sensing element to measure the mass of intake air
entering the engine, and send the signal to ECM.
A large amount of intake air represents acceleration or high load conditions
while a small amount of intake air represents deceleration or idle...
Categories

(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more